| Category | Details |
|---|---|
| Materials |
- Wooden board: For the base and frame.
- 4 syringes: Two large ones and two small ones. - Plastic tubing: To connect the syringes. - Water: To act as the hydraulic fluid. - One-way valves: To control the flow of water. - Screws and washers: To secure the syringes to the board. - Hinges and springs: For the pressing mechanism. |
| Steps |
1. Prepare the Base: Cut a wooden board into four pieces and drill holes for the syringes. 2. Attach Syringes: Secure two large syringes to the top and bottom of the board with screws and washers. 3. Connect Syringes: Use plastic tubing to connect the large syringes, inserting a one-way valve in the middle. 4. Add Side Syringe: Attach another large syringe to the side of the board with a hinge and a spring. 5. Connect Side Syringe: Use another piece of plastic tubing and a one-way valve to connect the side syringe. 6. Fill with Water: Fill the small syringe with water and place it at the end of the tubing. 7. Activate the Press: Place an object between the top and bottom syringes and press the small syringe to activate the hydraulic press. |
| Safety Tips |
- Wear protective gear: Gloves and safety glasses are a must. - Work in a safe environment: Make sure your workspace is clear of any hazards. - Test carefully: Start with small, light objects to ensure everything is working correctly before moving on to heavier items. |